|
Product Details:
|
| Product Name: | DS Red HDPE Silicone Coated Release Liner For Foam Tapes | Material: | High Density Polyethylene (HDPE) |
|---|---|---|---|
| Thickness: | 0.07-0.15mm | Width: | 100-1100mm |
| Application: | Used For Foam Tapes, Acrylic Tapes, DS Tapes | Color: | Red, Black, Grey, White, Blue, Green, Etc. |
| Performance: | Double Side Silicone Coated(UV Curing) | Process: | Three-layers Blowing |
| Highlight: | HDPE Silicone Coated Release Liner,Foam Tapes Silicone Coated Release Liner,0.15mm Silicone Coated Release Liner |
||
A release liner is a plastic release film which made of PE/PP/PET film as carrier, silicon coated
on either one or two-sided releases options.
The film is uniform coated and very smooth and clean without wrinkles/tears/granules/bubbles/
pinholes or other defects. This highly conformable product bonds well to most surfaces over
a wide range of temperatures and release film is heavily used in consumer products worldwide.
Our DS red HDPE silicone coated release liner for foam tapes, it is a two-sided release liner,
double sides are UV curing, the subsequent adhesion are more than 90%, it is special design
for HM adhesive or acrylic adhesive double side foam tapes.
Applications:
| ♦ Used for HM-adhesive tapes |
| ♦ Used for acrylic foam tapes |
| ♦ Used for double side tapes |
For kinds of DS self-adhesive tapes:
| Name | Release Film double side silicone – Red | Specification | 0.07mm*1050mm | ||
| Testing Method | Q/TPXP 1-2013 | Date | 2020.8.5 | ||
| NO. | Testing Item | Factory Requirement | Testing Result | Conclusion | |
| 1 | Appearance | No bubble , no broken | Qualified | Qualified | |
| 2 |
Specification (mm) |
Width | 1050±5mm | 1052 | Qualified |
| Thickness | 0.07±0.005mm | 0.072 | Qualified | ||
| 3 |
Max.F (N/50mm) |
TD | ≥30 | 102 | Qualified |
| MD | ≥30 | 114 | Qualified | ||
| 4 |
Elongation@Break (%) |
TD | ≥150 | 864 | Qualified |
| MD | ≥200 | 726 | Qualified | ||
| 5 | Tensile Strength(MPa) | TD | ≥16 | 28 | Qualified |
| MD | ≥18 | 32 | Qualified | ||
| 6 |
Release Force (N/25mm) |
Outer Side: 0.142 | Qualified | ||
| Inner Side: 0.062 | |||||
| 7 | Subsequent Adhesion (%) |
≥90 | 92 | Qualified | |
Why UPASS:
We have a Innovation Team to R&D new products, we have a QC team to control the quality,
make sure they are the best products when send out.
Contact Person: Mr. Aaron.Zhang
Tel: 0086-15901747869
