|
Product Details:
|
| Product Name: | Waterproof Membranes Used HDPE Silicone Coated Release Liner | Material: | High Density Polyethylene |
|---|---|---|---|
| Thickness: | 0.03-0.15mm | Width: | 100-2000mm |
| Application: | Used For Waterproofing Membranes, Adhesive Tapes,etc. | Color: | Black, Grey, White, Blue, Green, Etc. |
| Performance: | One Side Or Two Side Silicone Coated | Process: | Three-layers Blowing |
| High Light: | 0.03mm Silicone Coated Film,0.15mm Silicone Coated Film,0.03mm release liner film |
||
HDPE release liner refers to the film with separative film on the surface.
HDPE release film does not have viscidity or slight viscidity contact with specific material under the limited conditions. Normally in order to increase the release force of the film, it does corona treatment to the film and coated with silicone, to make it act out the light and stable release force to different organic pressure glue. According to different release film , the release force is different, the viscidity of release product glue is different , to adjust the release force, to make it have the light and stable release force during peeling. There are thermal curing and UV curing for silicone coating due to different release force requirements.
It is widely used in protective film, self-adhesive products, foam tape, die-cutting pressing, demoulding and other industries. It plays a very good isolation and protection role.
1.Easy to peel off when remove the release film.
2.High residual adhesiveness rate(≥75%) to prevent the influence of silicon transfer on products.
3.Environmental Production technology of solvent and solvent-free products.
4.Environmentally Friendly. Can be recycling.
5.We have rich experience in product research and development to meet the various needs of customers.
How to producing Waterproof Membranes Used HDPE Silicone Coated Release Liner?
1. 3 layers film blowing:
2. Silicone Coating:
| NO. | Item | Unit | Factory parameter |
| 1 | Appearance | Surface is flat, no wrinkles, and the winding is neat | |
| 2 | Thickness | mm | 0.03-0.15 |
| 3 | Width | mm | 100-2000 |
| 4 | Max.Fd | N/50mm | ≥30 |
| 5 | Elongation at break | % | ≥200 |
| 6 | Release Force | g/inch | 10-25 |
| 7 | Subsequent Adhesion | % | ≥75 |
Contact Person: Mr. Aaron.Zhang
Tel: 0086-15901747869
