Product Details:
|
Product Name: | Surface Film Application PE Laminated Film For Waterproof Membranes | Material: | HDPE |
---|---|---|---|
Production Process: | Cross Laminated | Performance: | Thermal Dimensional Stability |
Thickness: | 0.09-0.26 | Width: | 100-1250mm |
Color: | Black, Grey, Blue, Green, Etc. | Application: | Underlayment, Waterproofing Membrane |
Printing: | Can Be Customizable | Sample: | Available |
Highlight: | 0.26 Thick Cross Laminated Film,Underlayment Cross Laminated Film,30Mpa Cross Laminated Film |
Surface Film Application PE Laminated Film For Waterproof Membranes
Description:
It is a multi-layer composite film,made of HDPE as the base material,
Through multi-layer co-extrusion blow molding into embryos, and then by multiple pull
Stretching, then rotary cutting into a film substrate with a horizontal and vertical
distribution of 45 °, and finally through cross-laminated with an extruder with their
orientation directions crossed at 90 degrees.
Parameter:
NO. | Item | Performance | ||
SDM-30 | SDM-60 | |||
1 | Tensile Property | Tensile Strength/Mpa ≥ | 30 | 50 |
MaxF/(N/50mm) ≥ | 200 | 300 | ||
Elongation as MaxF/% ≥ | 200 | |||
Elongation at break/% ≥ | 250 | |||
2 | Sample number of no broken tested by free-falling dart method ≥ | 8 | ||
3 | Tear Strength(Nail Shank)/N ≥ | 60 | ||
4 | Angle Tear Strength/N ≥ | 25 | ||
5 | Thermal Stability | 120 ℃,10min, No bulb, No deformation | ||
6 | Cryogenic Flexibility ℃ |
-35℃, No fissure, No delamination |
||
7 | Thermal Ageing | Appearance | No bulb, No deformation | |
Subsequent MaxF/% ≥ | 80 | |||
Elongation at MaxF/% ≥ | 200 | |||
Elongation at break/% ≥ | 200 | |||
8 | Artificial Weathering | Appearance | No bulb, No deformation | |
Subsequent MaxF/% ≥ | 70 | |||
Elongation at MaxF/% ≥ | 180 | |||
Elongation at break/% ≥ | 180 |
Advantages:
1. Puncture Resistance: less accidental damage |
2. Thermal Dimensional Stability: No fish-mouthing or controlled shrinkage |
3. Cold temperature resistant down to -30°C/-20°C |
4. Cross laminated film allows waterproofing membranes to bridge gaps in sheathing and is resistant to damage from incidental movement and settling of the roof |
5. UV Stability for typical job site exposure |
About US:
Upass, founded in 2008, now as a governing unit of China Building Waterproof Association,
a vice chairman unit of Professional Committee of China Modified Plastic Association,
an enterprise with Triple A credibility in China Plastic Association, not only assists the
development of the relevant industries, but also upholds the conception of sustainable
development by successive technological innovation. Upass so far has acquired over
100 of intellectual property rights.
Contact Person: Mr. Aaron.Zhang
Tel: 0086-15901747869