|
Product Details:
|
| Product Name: | Waterproof Application High Temperature Resistance UV Release Film | Material: | PP、HDPE |
|---|---|---|---|
| Type: | Release Liner | Application: | Self-adhesive Tapes/Bitumen Membranes |
| Performance: | High Temperature Resistance | Curing Type: | UV Curing |
| Silicone: | Solvent Less | Silicon Transmission: | Less Than 10% |
| Highlight: | Waterproof UV Release Film,PP UV Release Film,Uv Curing Release Film |
||
Waterproof Application High Temperature Resistance UV Release Film
Description:
Release Liner/Film is siliconized on PE, PET, PP or other type plastic films or papers,
that enables to possess release effectiveness. It is usually used as the protective film
of self-adhesive products, and directly peeled off from the self-adhesive products
when used.
UV Curing Release Liner, it also called silicone film or silicone release film or HDPE liner.
It uses PP,HDPE plastic film as carrier, silicon coated(Solvent Less Type) on one side or
both sides by UV curing type.
Material:
PP/HDPE/PET/Polyolefin
Type:
Release Film/Release Liner
Performance index:
| Item | Unit | Index | |
| Thickness | mm | 0.03 | |
| Width | mm | ≤2010 | |
| GSM | g/㎡ | 30 | |
| Sleeve I.D. | mm | 76/152 | |
| Tensile strength(MD) | Mpa | ≥40 | |
| Elongation @ break | MD | % | ≥500 |
| TD | % | ≥500 | |
| Shrinkage (120℃ / 3min) | MD | % | ≤5 |
| TD | % | ≤0 | |
| Surface Tension (Single /Double) | mN/m | ≥42 | |
| Peeling force | g/inch | ≤25 | |
| Subsequent adhesion rate | % | ≥85 | |
Self-adhesive Tapes:
Contact Person: Mr. Aaron.Zhang
Tel: 0086-15901747869
